Xantrex RNWC35
  • Xantrex RNWC35-0


manufactured by Xantrex

Xantrex (Schneider Electric) C35 Charge Controller. C-Series Charge Controller - 12 or 24VDC 35A PN: RNWC35

Current Price:      $113.00

Only 5 left in stock!


UPC Code:
Category: Charge Controllers
Item Code: RNWC35
Condition: New
Status: New OEM
Warranty: Manufacturer
Unit weight: 6lbs  *dm
Ship To: 48 countries!
Qty in stock: 5
See more at: RNWC35 Manufacturer

Additional Information

Xantrex (Schneider Electric) 35A C-Series Charge Controller - 12 or 24VDC

Manufacturer Part Number: RNWC35

Product Overview

Silent Microprocessor Control All C Series controllers have a powerful microprocessor at their core which increases system performance and maximizes battery life. They are fully solid state and operate silently. PWM Charge Performance C Series controllers all use Pulse Width Modulation (PWM) charging profiles which are designed to provide a full charge to your battery while, at the same time, minimize gassing which can shorten battery life. 3-Stage Battery Charging All C Series controllers automatically initiate a 3-stage battery charging cycle. Bulk, Absorption, and Float modes are used to ensure that voltage and current settings accurately match the batteries actual state of charge. This means fast-as-possible charging and extended battery life. An auto equalize mode can be easily switched off when the controller is used with sealed batteries. C Series controllers are factory set for solar PV battery charging operation. Field Adjustable There are a number of field configurable, user adjustments for C Series controllers. C35 and C60 can only be set for 12 or 24 VDC operation. The C40 may be configured for 12, 24 or 48 volt systems. Bulk and Float voltage set points are user adjustable which allows use with a wide variety of battery technologies including; flooded lead acid, gel, and absorbed glass mat. In addition, there are manually selectable settings for Nicad batteries. DC Load Controller Mode When used as a load controller, the C Series will automatically turn a DC load on or off at predetermined battery voltage settings. Both LVD (low voltage disconnect) and LVR (low voltage reconnect) set points are user adjustable. DC Diversion Mode In this mode, all power, which is not used to maintain a full charge on the batteries, is diverted to a load dump such as water or space heaters. Diversion mode is used to regulate microhydro and wind turbine systems which need a constant load. LED Status Indicator A simple to read, multi-color LED indicates operating status and is standard on all C Series controllers. UL and cUL Listed C Series controllers are listed by UL to exacting UL 1741 and cUL CSA 22.2 107.1-95 standards. C Series controllers are also CE compliant (European countries) and are designed to CTIK standards (Australia). Their current ratings are real world and do not have to be derated to comply with USA NEC 125% over-current requirements.

Technical Specifications

Battery/System Voltage (12V)Yes
Battery/System Voltage (24V)Yes
CertificationsUL 1741 CSA 22.2 No 107.1-95
Country of OriginCHN
Product Feature #112 A for 12 V batteries
Product Feature #2Silent, pulse width modulated microprocessor control
Product Feature #3Electronic protection against short-circuit, overload, over temperature and reverse polarity conditions
Product Feature #4Automatic overload protection in both active and passive models
Product Feature #5Field adjustable voltage and battery set points
Warranty2 years through manufacturer
Product Weight3 lbs


Paypal Verify Ebay Platinum Seller