OutBack VFX2812M
  • OutBack VFX2812M-0


manufactured by OutBack

OutBack VFX2812M Sine Wave Vented Mobile Inverter 2800W, 12VDC w/built-in AC neutral/ground switching system

Current Price:      $1,735.00

Only 3 left in stock!


UPC Code:
Category: Inverter
Item Code: 320-0012
Condition: New
Status: New OEM
Warranty: Manufacturer
Unit weight: 76lbs  *dm
Ship To: 48 countries!
Qty in stock: 3
See more at: 320-0012 Manufacturer

Additional Information

Detailed Description:

Continuous Watts: 2800 Watts
Output Voltage: 120 VAC/60 Hz
DC Input Voltage (Nominal): 12 VDC

The Outback M-Series inverter/charger is an all-in-one mobile power solution. It incorporates a true sinewave inverter, intelligent battery charger and an AC transfer switch which includes a 30 amp pass through and automatic neutral/ground switching.All M-series inverter/chargers produce virtually distortion free AC power for all your mobile electrical needs. Industry leading surge power starts multiple heavy loads simultaneously without the need to run your generator. Innovative power factor corrected battery charging uses multiple stages to charge your batteries quickly so your generator runs less. Ultra fast AC transfer switch with battery charger back off circuitry allows you to seamlessly take full advantage of your shore cord.

Outbacks modular design makes expanding your power system as easy as adding an additional inverter/charger. Integrated network communications makes system setup and monitoring easy through a single MATE2M controller. Very quiet operation allows mounting in noise sensitive areas, even under a bunk. Repairs in field are easy thanks to a simple three circuit board design.The Outback M-Series inverter is the superior choice when you need a reliable, powerful and modular true sine wave inverter/charger.The vented OutBack M-Series has the same proven technology and conformal coated circuit boards as the sealed version but offered in a vented chassis for higher power output. The fully screened "bug-proof" openings keep the power conversion components cool in very hot environments even when operated at high power for extended periods in more protected environments.

The FX Series Inverter/Charger off ers a complete power conversion system—DC to AC, battery charging, and an AC Transfer Relay—and can be used for stand-alone or back-up applications. OutBack Power Systems does everything possible to assure the components you purchase will function properly and safely when installed as instructed according to local and national electrical codes. Please read all of the instructions and the instructions that come with any OutBack components included in your power system. Instructions on individual FX set-ups as well as systems assemblies are includedwith the FX and VFX Series Inverter/Charger Installation Manual.

The OutBack Power Systems FX Series Inverter/Charger is ETL listed to UL1741 (Inverters, Converters, Controllers, and Interconnection System Equipment for Use with Distributed Energy Resources). All Mobile FX Series Inverter/Chargers are ETL listed to UL 458. Grounding Instructions – Each FX should be connected to a grounded, permanent wiring system. For most installations, the negative battery conductor should be bonded to the grounding system at one (and only one) point in the DC system. All installations must comply with all national and local codes and ordinances. System grounding as required by the National Electric Code, ANSI /NFPA 70-1996, is the responsibility of the system installer.


  • Powder-coated all-aluminum die-cast chassis
  • Internal electronic components are cooled by outside air
  • Stainless steel screen to protect air intake and internal fan
  • Ul 94VO plastic vent grills to protect the air exhaust. All openings are 0.0025 inches square to keep out dirt, bugs, and other critters
  • Air inlet comes with removable, washable foam filter insert to trap small particles
  • Conformal coated circuit boards to resist corrosion
  • Higher output power when inverting or battery charging when compared with the sealed FX inverter versions
  • Designed to allow easy field servicing and repair
  • Specifications:

    Continuous Output Power: 2800 VA
    Continuous Output Current at 25 degrees: 23.3 amps AC RMS
    Output Voltage: 120 VAC/60 Hz
    DC Input Voltage (Nominal): 12 VDC
    Typical Efficiency: 90%
    Output Voltage Regulation: +/-2% typical
    Continuous DC Charge Rate: 80 Amps DC
    Frequency Range: 54.0-66.0 Hz
    DC Input Voltage Range: 10.5-17.0 VDC
    Unit Dimensions (LxWxH): 12x8.25x16.25 (inches)
    Unit Weight: 54 lbs
    Warranty: Standard 2 year/ Optional 5 year
    Paypal Verify Ebay Platinum Seller