manufactured by Seagate

Seagate Cheetah ST136403FC 36.4GB 10000 RPM 40PIN SCSI Fiber Channel PN: 9L7004-032 Model: ST136403FC

Current Price:      $10.00

Only 2 left in stock!


UPC Code:
Category: Legacy Hard Drives
Item Code: ST136403FC-SP
Condition: Used
Status: System Pull
Warranty: 30 Days
Unit weight: 1lbs 
Ship To: 48 countries!
Qty in stock: 2

Additional Information

Cheetah 36FC drives combine dual stripe magneto resistive (DSMR) heads, partial response/maximum likelihood (PRML) read channel electronics, embedded servo technology, and a Fibre Channel interface to provide high performance, high capacity data storage for a variety of systems including engineering workstations, network servers, mainframes, and supercomputers.
Cheetah 36FC drives are random access storage devices designed to support the Fibre Channel Arbitrated Loop (FC-AL) and SCSI Fibre Channel Protocol as described in the ANSI specifications, this document, and the Fibre Channel Interface Manual (part number 77767496) which describes the general interface characteristics of this drive. ST136403FC/FCV drives are classified as intelligent peripherals and provide level 2 conformance (highest level) with the ANSI SCSI-1 standard.
The head and disc assembly (HDA) is environmentally sealed at the factory. Air recirculates within the HDA through a non-replaceable filter to maintain a contamination-free HDA environment.

Manufacturer: Seagate
Part Number: ST136403FC
Series: Cheetah 36
OEM P/N: 9L7004
Condition: Used/Bulk Packaging/Bare Drive

Warranty: 30 days warranty with Centrix, no Seagate warranty.

• Interface: Fiber Channel
• Capacity: 36.4GB
• Cache: 1MB
• Average Seek Time: 6.15MS
• RPM: 10000RPM

Physical Spec:
• Form Factor: 3.5 in
• Height (maximum): 1.62 in.
• Width (maximum): 4 in.
• Length (maximum): 5.75 in

•Integrated dual port FC-AL controller
•Concurrent dual port transfers
•Support for FC arbitrated loop, private and public loop attachment
•Differential copper FC drivers and receivers
•Downloadable firmware using the FC-AL interface
•Supports SCSI enclosure services through the interface connector
•128-deep task set (queue)
•Supports up to 32 initiators
•Drive selection ID and configuration options are set on the FC-AL backpanel or through interface commands. Jumpers are not used on the drive.
•Fibre Channel worldwide name uniquely identifies the drive and each port
•User-selectable logical block size (512 to 4,096 bytes per logical block)
•Selectable frame sizes from 128 to 2,112 bytes
•Industry standard 3.5-inch half-high form factor dimensions
•Programmable logical block reallocation scheme
•Flawed logical block reallocation at format time
•Programmable auto write and read reallocation
•Reed-Solomon error correction code
•Sealed head and disc assembly (HDA)
•No preventive maintenance or adjustments required
•Dedicated head landing zone
•Automatic shipping lock
•Embedded Grey Code track address to eliminate seek errors
•Self-diagnostics performed at power on
•1:1 interleave
•Zone bit recording (ZBR)
•Vertical, horizontal, or top down mounting
•Dynamic spindle brake
•1,024 Kbyte data buffer (4,096 Kbytes on the FCV model).
•Embedded servo design
•Reallocation of defects on command (Post Format)
•Fibre Channel interface transports SCSI protocol
Information Links: Seagate Specifications
Paypal Verify Ebay Platinum Seller