60% OFF

Bitmain Antminer S7
  • Bitmain Antminer S7-0
  • No:1 Thumbnail of Bitmain Antminer S7
  • No:2 Thumbnail of Bitmain Antminer S7
  • No:3 Thumbnail of Bitmain Antminer S7
  • No:4 Thumbnail of Bitmain Antminer S7

Antminer S7

manufactured by Bitmain

Tested at 650Mhz Bitmain Antminer S7 Batch 8, stable at 4.73TH/s. Antminer S7 ~4.73TH/s @ .25W/GH 28nm ASIC Bitcoin Miner. ***Shipping Note: There is currently a 5-6 Day Handling time on this Item***

Original Price:      $1,200.00
You save:      $721.00
Current Price:      $479.00

Only 7 left in stock!


UPC Code:
Category: Bitcoin
Item Code: S7BTCH8-650MHZ-4.27
Condition: Used
Status: System Pull
Warranty: 30 Days
Unit weight: 15lbs 
Ship To: 48 countries!
Qty in stock: 7
See more at: S7BTCH8-650MHZ-4.27 Manufacturer

Additional Information

These S7 Batch 8 units are in like-new condition and have been running for just about a month at our hashing facility.

S7 Specifications:

  • Hash Rate: 4.73 TH/s 5%
  • Power Consumption: 1293W 10%
  • Power Efficiency: 0.25 W/GH 10%
  • Requires 10x 6 pin pci-e connectors
  • Power Supply required and sold seperately

Dimensions: 301mm(L)*123mm(W)*155mm(H), Cooling: 2x 12038 fan Operating Temperature: 0 C to 40 C, Network Connection: Ethernet, Default Frequency: 700M

Please note the following:

1. Power consumption figures will vary with your PSUs efficiency, the ambient operating temperature and the accuracy of the power meter. Figures provided are at the wall, with AC/DC 93% efficiency, and 25C ambient temp.
2. PSU: A power supply unit is not included, and you will need to purchase one separately. There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 are required on each board. Do not connect more than one PSU to the same hashing board!
3. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. If you use different PSU for hash boards and control board, please make sure to power the hash boards first and the control board only after the hash boards have been powered.
Paypal Verify Ebay Platinum Seller