Fusion-io F00-001-1T20-CS-0001
  • Fusion-io F00-001-1T20-CS-0001-0
  • No:1 Thumbnail of Fusion-io F00-001-1T20-CS-0001
  • No:2 Thumbnail of Fusion-io F00-001-1T20-CS-0001


manufactured by Fusion-io

Fusion-io ioDrive2 F00-001-1T20-CS-001 Duo SLC Application Accelerator card. 1.2TB of low-latency, high-endurance storage for todays most demanding applications. System pull.

Current Price:      $3,975.00


UPC Code:
Category: SSD Solid State
Item Code: 1T20-CS-0001
Condition: Used
Status: System Pull
Warranty: Manufacturer
Unit weight: 8lbs 
Ship To: 48 countries!
Qty in stock: More than 10

Additional Information

Fusion ioDrive2 Duo Specifications

  • ioDrive2 Duo Capacity  1.2TB SLC
    • Read Bandwidth (1 MB)  3.0 GB/s
    • Write Bandwidth (1 MB)  2.5 GB/s
    • Ran. Read IOPS (512B) 700,000
    • Ran. Write IOPS (512B) 1,100,000
    • Ran. Read IOPS (4K)  580,000
    • Ran. Write IOPS (4K)  535,000
    • Read Access Latency  47µs
    • Write Access Latency  15µs
  • 2xnm NAND Flash Memory Single-Level Cell (SLC)
  • Bus Interface PCI-Express 2.0 x8 electrical x8 physical
  • Weight:  Less than 11 ounces
  • Form Factor:  Full- height, half-length (FHHL)
  • Warranty:  5 years or maximum endurance used
  • Endurance: 190PBW (95PBW per controller)
  • Supported Operating Systems
    • Microsoft Windows Microsoft Windows: 64-bit Windows Server 2012, Windows Server 2008 R2, Windows Server 2008, Windows Server 2003
    • Linux RHEL 5/6; SLES 10/11; OEL 5/6; CentOS 5/6; Debian Squeeze; Fedora 16/17; openSUSE 12; Ubuntu 10/11/12
    • UNIX Solaris 10/11 x64; OpenSolaris 2009.06 x64; OSX 10.6/10.7/10.8
    • Hypervisors VMware ESX 4.0/4.1/ESXi 4.1/5.0/5.1, Windows 2008 R2 with Hyper-V, Hyper-V Server 2008 R2

Design and Build

The Fusion ioDrive2 Duo 1.2TB SLC is a Full-Height Half-Length (FHHL) x8 PCI-Express 2.0 card, with two controllers and a PCIe switch attached to the main circuit board. The NAND is attached through two daughter boards, giving Fusion a manufacturing advantage when switching to new NAND configurations. Instead of redesigning the card each time a lithography change rolls around (NAND die shrink), they can install a new daughter board and flash new firmware onto the FPGA. Our SLC ioDrive2 Duo is formed with two 600GB ioMemory devices, each using 4 lanes of the PCIe connection. The PCB layout is very efficient, with large passive heatsinks covering the two controllers on the right side of the card.

Paypal Verify Ebay Platinum Seller